Crayon/Notebook Holder

 I started my crayon holder by choosing three colors.  You can choose anywhere from 1-3 colors if you like.  I wanted mine to be colorful!  Start by cutting 2 - 6"x14" pieces, and 1 - 4"x16" piece.  If you want it to be taller, add about an inch on the two pieces to make it 7"x14".  (My original single piece I cut longer, just to make sure I had space but ended cutting it off at the end to make the 16").

Now, take your single piece (4x16) and hem what will be the top.

 

Next, sew your left side of your 4x16 piece to one of your 6x14 pieces.

 

Measure how big your want for your notebook, pin, and sew.

Next, you will do the same process for your crayon pockets.  (This is why you want this piece longer, so that you can have some give for the crayon).

 

I then sewed my final piece (wrong sides together) to the other, keeping the opposite side of the notebook open.

 

Hot glue the side to create a hem, and add two pieces of ribbon, then hot glue it all closed.

 

Voila... here is your crayon/notebook holder!

 

Craft Nook

In our tiny little apartment, I haven't had any space for my crafts, sewing, etc.  I rearranged some things and decided to make a craft "nook".  It's better than nothing right?  So we took a trip to IKEA and got me some things to help organize.

Desk: $20
Desk extender: $14.99
Organizing baskets (which doubled as baskets, and I used the handles as ribbon holders): 4 @ $2.99/piece
Plastic bins for fabric and felt: 2 @ 4.99 a piece
Small storage containers: 2.99 for 100

I used the desk extender to hold my sewing machine so that I have open counter space.  I also found small plastic storage things to hold all of my buttons and little pieces.

I love how it turned out and I'm excited to have a space for myself!!

Trick or Treat Bag

I made a trick or treat bag to match my nephews costume that I made.  It, like the costume, was super easy.  I had so much felt left over that I figured, WHY NOT?

Angry Birds Costume Tutorial

Well, I've completed my first child's Halloween costume.  I am SO happy with how it turned out!  This is for my nephew, Joaquin, who LOVES Angry Birds.  He wanted to have the green angry bird.  So, between this picture...

And the tutorial here, I was able to put it together.  In the tutorial, I followed the directions for the black angry bird.  This costume will fit a child, size 6.

It was actually super easy and only took me a couple of hours to put together!

You will need these supplies:

1 yd. of green felt (70"-72" bolt)

1 yd. of matching cotton (I chose a lighter green color)

Sheets of felt in dark green, light green, black, white, & yellow

Matching thread

1 bag of pillow stuffing

Measuring Tool

Scissors

Hot Glue Gun

Sewing Machine

I started by cutting my felt into two pieces.  Then, take a single piece and fold it in quarters.  Measure 11" from the center (I originally measured 11.5" but scaled it back to 11").  It's easier as a guide to make a mark along each side, as well as from the center.

 Cut out your shape so you will unfold it to have a circle.

 

Do the same for your cotton pieces.  These will be the inside of the costume.

 

Next, you want to cut out the pieces for the face.  I didn't have a pattern for the pieces, I just eyeballed the picture and made my own.

 

Place them where you want them, and pin them in place.

 

Next you want to cut a whole for the neck.  I also just eyeballed this.  Make sure to have your felt piece and cotton piece together, so the whole is the same.

 

The next step is to sew your felt and cotton pieces together.  

Be sure to leave about a 6" space, to turn inside out, then stuff.

Once you've stuffed your piece, take your hot glue gun and glue the opening closed.

 

 Here is what they look like, after sewing and stuffing.  The next step is to glue all of your pieces on.

Ta da!!  And there you have your angry bird!  See, wasn't that easy?

The last step is to put them together but that step will come later, as I have to see where the arm holes need to go, and my nephew is up in New York.  But, I will just be sewing from the neck to the arm hole, then from the bottom of the arm hole, just down a few inches, leaving an opening for the legs.

 

Happy crafting!

DIY Play kitchen

After many challenges with spray paint, and trying to get these put together, I did it!  I wanted to make Sydney a kitchen because I didn't want to spend so much money on something that she may or may not play with.  So, my intention was to make this and see how it goes.

I started my project with an old bookshelf and an old nightstand.  I can't find my original pictures of the items.  But here is the finished project...

 For the fridge, I used cardboard to cover the front.  I used old IKEA handles that I had, that I never used for the handles.  I also included pictures on the fridge, and glued magnets on to give it a real effect.

 

For the counter, I used a wall decal to cover the cardboard.  I used CD's for the burners, a bowl for the sink, and constructed my own faucet out of cardboard.  All of this, I used Metallic spray paint for a "stainless steel" type look.

I made a curtain for a cover and there is a shelf on the inside to put plates, cups, food, etc.  

 

I LOVE how it turned out!!!!  My last thing that I need to do is put magnet on the fridge doors, so that they will stay closed.

Happy Crafting!